|Surface Finishing||Color Coated|
|Cycle Time||20 Seconds (Incl Loading & Unloading)|
|Sheet Thickness||1 mm (0.04 Inch)|
|Motor Power||Main 3-5 HP (Depending On Sheet Thickness) Hydraulic Power Pack 2 HP|
|Air required||2.5 Bar|
|Net Weight||1500 Kgs. (3300 lbs.)|
|Gross Weight||1750 Kgs. (3850 lbs.)|
|Dimensions||1320 x 950 x Ht (As Per Muffler Height). (52 x 37 x Ht.)|
|Max. Can Dia.||180 mm (7.0 Inch)|
|Min. Can Dia.||60 mm (2.4 Inch)|
The silencer / muffler is placed on the support and is held vertically by means of a non-contact magnet. The dual push buttons are pressed to begin the operation. The silencer is pneumatically clamped and the seam operation is started automatically. After completion, the seaming head is stopped and the muffler is de-clamped for unloading.
The sequence is controlled by a simple PLC (Programmable Logic Controller).
This Seamer is used for inward seaming applications. For standard double seaming of mufflers, please see our Round Can Seamer page.